Anticorrosive and Protective treatment for Condensers, resistant to salt and smog - Ready to Use
NO-AGE is the protective solution for all the systems which are exposed in highly oxidizing environments (such as sea places) or heavily polluted ones, where salt and acid rain visibly reduced the life of a compressor, but also for extending the natural life of all the systems.
The product generates a microfilm which does not limit the heat exchange, but reduces the dirt ability to remain on the surfaces and protects metals with a corrosion barrier.
Easy to apply, NO-AGE takes a few minutes to get activated and need to be quickly rinsed.
Its prolonged action lasts several months and varies depending on the level of environmental aggression and exposure of the compressor.
NO-AGE is to be applied on clean surfaces, that is why before its usage it is recommended to wash them with one of Errecom series cleaner, to be chosen depending on the type of dirt.
Instructions:
After proper cleaning and rinsing of the condenser, apply NO-AGE by spraying it normally on the entire surface.
Let it drain and act for at least 5 minutes: after that, rinse it lightly in order to remove product excess.
Perform this operation at the beginning and end of each season of a/c system use.
For highly exposed areas perform at least every 3 months.
NO-AGE is a product for professional use, use gloves and eyewear when dispensing.
BEST ACID COND CLEANER is a deoxidizer acid cleaner for condensers in conditions of extreme sedimented dirty.
Thanks to its properties, BEST ACID COND CLEANER is a very efficient deoxidizer as it removes also the stubborn stain BEST ACID COND CLEANER is a ready to use solution, suitable to easily eliminates oxidations, dried salt and scales.
It is the perfect product to reactivate the neglected systems, by improving their efficiency; it is especially indicated for deeply descaling the settled dirt in the voids of the finned coils.
Instructions:
- Spray on the surface that has to be cleaned
- Wait five minutes and rinse with a lot of water
- Before using BEST ACID COND CLEANER, is suggested to do a degrease treatment with alkaline base product (Cond Cleaner) in order to have a best result.
Avoid the contact with delicate or varnished materials.
BEST ACID COND CLEANER does not damage the metallic parts.
BEST ACID COND CLEANER must be used by experienced professionals, provided with the specific personal protective equipments.
