R407C Kryon® 407C - KryoSmart Alu T-PED aluminum refillable cylinder 1,1 Lt/ 0,85 kgs. - 48 Bar
GeneralGas KryoSmart cylinders are manufactured in compliance with the European T-PED regulation and are refillable an infinite number of times.
The displayed price includes a value of 8,00 euro, corresponding to the security deposit of the empty container; this security deposit constitutes a binding modality for the return of the container for refilling purposes, as provided for by Article 11 paragraph 4 of the new Reg. (EU) Fgas 2024/573.
GeneralGas also provides an effective refill service for the empty container and subsequent return to the customer (HandyGas service), carried out at the GeneralGas plant in Cernusco sul Naviglio (MI).
Thanks to our exclusive HandyGas Refill and Redelivery service, if you return the empty KryoSmart container you will be entitled to receive a new KryoSmart cylinder for the price of the refill only (you will therefore only pay the value of the refrigerant gas).
Note: the cost of shipping the empty container from the customer's warehouse to the GeneralGas plant in Cernusco sul Naviglio is borne by the customer.
Kryon® 407C The refrigerant used in home air conditioning
Kryon® 407C is a zeotropic ternary mixture composed of HFC-32/HFC-125/HFC-134a. It has been developed as a replacement for R-22 (HFC-22). Il Kryon® 407C is a non ozone depleting refrigerant and lends itself to many uses in refrigeration and air conditioning systems.
Kryon® 407C is a zeotropic ternary mixture that, unlike azeotropic fluid, changes its temperature during evaporation and condensation phases, for a given value of pressure. Kryon® 407C has a moderate T° Glide (5÷7 °C). Therefore it is very important that Kryon® 407C is transferred only as a liquid state when charging a system, and not as a vapour state. That would cause a change in the composition of the refrigerant, which could damage the plant.
Applications
Kryon® 407C is used in home and small shop air conditioning systems.
Kryon® 407C is also used in water chillers not provided with centrifugal compressor, and in mediumtemperature refrigeration systems.
Performance
- Minimum capacity reduction compared to R-22.
- Because of its characteristics similar to R-22, Kryon® 407C can be used in conversion fluid in systems that usually use R-22.
- Changes in the project to achieve a performance optimization are minimum.
Recommended Lubricants
When using Kryon® 407C in conversion of systems working with R-22, some changes in the system are necessary, as for example the replacement of lubricant.
Mineral oils and alkylbenzene lubricants are immiscible with Kryon® 407C. Please get in touch with the plant manufacturer for recommended lubrificant.
KryoSmart® Alu Cylinders - Cylinders with a small amount of refrigerant charge
In the field of heating-plumping, the use of cylinders with a small capacity is very useful when refilling connecting pipes or conditioners. The advantage consists in marketing a cylinder that has a low market value, and therefore it is easier to sell it. Our KryoSmart® Alu Cylinders are available 1,1 Litre size (in pack of 1 - 6 and 12 pieces). KryoSmart® Alu Cylinders are made of high quality aluminum with a maximum working pressure equal to 48 bar. KryoSmart® Alu cylinders are filled by General Gas with the use of a patented system called “High PuritySystem”. With this method it is possible to achieve a quality standard as required by the major air conditioning and refrigerating system manufacturers. This technology allows you to obtain a gas humidity below the maximum limit (equal to 10 ppm). Therefore this type of cylinder (contents varies between 750 to 900 gr. depending on the gas filled) is the most suitable one to meet the needs of heating & plumbing market.
Application:
KryoSmart® Alu cylinders are used every time a small quantity of refrigerant is needed.
They are mostly used in thermohydraulic market
Performance:
- KryoSmart® Alu cylinders are manufactured in high quality aluminum and have a maximum working pressure equal to 48 bar.
- A “Low Cost” and “Eco-Friendly” Solution.
- Patented filling system “High Purity System”.
- They reduce the investment needed to buy refrigerants.
